iMate - PDA2K / EVDO
Product Number: 977612
Product Name:
Fixed Holder Antenna Connection
Product Details
Mount for iMate PDA2K / EVDO or O2 XDA IIs - With Antenna connection
Please read all of the instructions and look at the pictures before attaching the holder.
1. Installation of holder: Loosen the screw in the center of the holder so you can remove the attaching part on the back. Place the attaching part on desired position. Screw the attaching part into place with the enclosed screws. Place the holder over the attaching part. Screw the holder onto the attaching part. The holder is in place.
2. To put the device in the holder: Pull out inner part of the holder. Place the device in the cradle, press it gently downwards so it is connected to the connector in the bottom of the holder. Then flip the device gently forwards so it connects to the external antenna connector.
3. To remove the device from the holder: Press forwards on the upper part of the holder, in the same time pull the upper part of the device gently so it is disconnected from the external atenna connector. Slide/lift the device out of the holder.
4. The holder is in place, with device in place.
1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder |
|
2. Place the attaching plate in the desired position on the dashmount. Screw the attaching plate into place with the enclosed screws |
|
3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate |
|
4. The holder is in place. PLEASE NOTE: Do not over tighten the attachment screw |
|
PDA Phones, Classic PDAs & Accessories
