Please read all of the instructions and look a the pictures before attaching the ClicOn.
1. Press the thin end of one of the enclosed gap openers into the gap between the frame surrounding the instrument panel and the dashboard, to widen the gap. Peel off the adhesive tape covers on the ClicOn. Press the angled edge on the right part of the ClicOn into the gap below the gap opener.
2. Flip the ClicOn forwards/leftwards so the angled right edge hooks behind the frame surrounding the instrument panel. Pull out the gap opener.
3. Press both gap openers into the gap between the frame surrounding the air vent and the frame surrounding the control panel. Place the gap openers about 10 cm apart. Press forwards on the left side of the ClicOn so it goes all the way into the gap between the gap openers. Pull out the gap openers.
4. The ClicOn is in place.
NO HOLES INSTALLATION: How to attach a dashmount to a dashboard 1
Trademarks are owned by the respective manufacturers. Copyright
1995-2008 C1 Group.
For information or assistance with this site, contact C1 Group
Helpdesk EAOE
Links: Technology at
Play
PDA Phones, Classic PDAs & Accessories
