| |  | Tibbo EM200 Embedded Ethernet - Sample |  | | | | |
| | |  | |
Product Description | |  | | | | | | Product Name | : | Ethernet Module | | | | | | Model No. | : | EM200 | | | | | | Introduction | : | The EM200 is Tibbo's new 100BaseT Ethernet-to-serial Module for onboard installation. Offering the smallest overall dimensions and lowest profile of all Tibbo Modules, the EM200 is an ideal choice for space-constrained applications. The EM200 is upward-compatible with Tibbo's original EM100 and pin-to-pin compatible with the EM120 Ethernet Module. To achieve its small dimensions, the Module doesn't have Ethernet magnetics onboard*.
* To save space, use RJ45 connector with built-in magnetics. This will also result in significantly lower EMI
| | | | | | Features | : | lVery compact, external dimensions only 32.1x18.5x7.3mm
lPower consumption: 220mA@5VDC
lOne 100BaseT Ethernet port; Ethernet magnetics not built in
lOne serial (TTL) port with full- or half-duplex operation**; baudrates of up to 115200bps; 5 parity modes (none, even, odd, mark, space); 7 or 8 data bits; optional RTS/CTS flow control
lSerial port includes RTS, CTS, DTR, DSR and five additional lines; all lines can be used as remotely controlled I/O
lFour LED lines*** provide Module status information
lTwo extended 4096-byte routing buffers
lOnboard EEPROM stores numerous user-definable functioning parameters (Setting)
lSupported network protocols include UDP, TCP, ARP, ICMP (PING) and DHCP
lModule setup can be performed through the serial port or network (over-the-network IP-address configuration is also supported)
lSpecialized "on-the-fly" commands for serial port control, "modem" commands to control network connections, status commands for remote status monitoring, etc.
lInternal firmware is upgradeable through the serial port or network
lSupplied with Device Server Toolkit (DST) for Windows, including Virtual Serial Port Driver (VSPD) (COM redirector)
lLINUX version of the VSPD is also available
lWorks with TIBBO.NET
lEM200-SK Starter Kit available
lCE- and FCC-approved
** Full-duplex mode is suitable for RS232 and RS422 comms., half-duplex mode- for RS485 comms. RS232/422/485 transceivers are not built in
*** LEDs must be connected externally
Learn more from: www.tibbo.com
| | | | | | Application | : | Data collection & security terminals:
* Access Control Terminals
* Security Devices
* Time Recorders
* Warehouse Terminals
* Shop floor automation Terminals
Remote Sensors & Meters:
* Power monitors
* Power meters
* Environmental monitors
* Temperature monitors
* Data loggers
Auto-ID Scanners:
* Barcode Scanners
* Magnetic Card Readers
* RFID Readers
* Electronic Signboards
* PC-less entry systems
* Low-cost educational systems
* Vending Machines
* POS Systems
* Laboratory instruments
* Serial printers
* PBX Stations and many, many others...
| | | | |
| |
| | Currently viewing:
Buy Tibbo EM200 Embedded Ethernet - Sample | |
Try searching for: tibbo em200 embedded ethernet sample | | | | | | | 0 items | | | | | | | | | | | | | | | | | | | | | | | |
Networking
