Rain8NET Professional Sprinkler Controller

Rain8NET - Professional Model Sprinkler Controller (Non-X10, RS232 control)

The Rain8net is a professional RS232 based modular 8-zone sprinkler controller module that can be controlled over the Internet by any computer. It is capable of driving standard 24Va.c. irrigation valves directly. Additional modules may be daisy chained to provide control and 24 Va.c. power to as many as 2040 irrigation zones from a single COM or USB port. - Turn on or off each of the zone individually - Turn off all zones on a specific module - Turn off all zones on all modules - Get the current status of all zones - Default run timer for each zone to prevent over watering - Up to 1000' between Rain8 and computer - Can work work with our RS232 Bobcat, Crestron, CBus and other Home Automation systems

There is a single RS232 connection between the controlling computer and the "master" Rain8. The distance between the computer and the controller is up to 1000' and requires only 3 wires: TX, RX and GND.

The 24VAC power and network communications are transferred from master to slave-to-slave etc.

The network connection for the slave units is an 8 conductor RJ45. Each slave has a pair of these modular jacks to pass on data and power to the next one in a daisy chain. Each slave also has a RS232 connection that is used only to assign the address during the initial configuration.

Specifications:

Electrical:
Voltage 24 - 27V a.c., 50 or 60Hz
Controller Module Current 30ma
Sprinkler Valve Voltage & Current 24V a.c., 500 mA maximum

Connections Master Unit:
12 place, plug in terminal strip
Two piece design allows user to unplug
Controller from sprinkler valve and power wiring. terms 1 - 8 (sprinkler valves 1 - 8)
Terminal 9 (sprinkler valve common)
Terminal 10 (sprinkler valve common)
Terminals 11 & 12 (24v AC from transformer)
RS232 serial port
RJ11 jack

Connections Slave Unit:
12 place, plug in terminal strip.
Same as above. terms 1 - 8 (sprinkler valves 1 - 8)
term 9 - 12 (not used)

RS-232 serial port:
(Used only for initial configuration) DB9

Mechanical:
Controller Size 3.8" x 2.4" x 1.0"
Weight 113 grams
Environmental 20-125 degrees
Indoor or outdoor (if mounted in a weatherproof enclosure)

Requirements and Specs

	Master Config program	Master configuration software for all WGL products
	Protocol Information	Protocol information on the Rain8NET, for installers
	Windows Rain8NET Configuration	Windows configuration software for Rain8NET controller
	Installation Instructions	Installation instructions for the Rain8NET