| Two IP Port Wireless VOIP PABX --- V-208
V-208 is a two IP port wireless DECT PABX for Voice Over IP. The cordless handset can select outgoing call through PSTN or VoIP depending on the system configuration. V-208 could be configured as one PSTN and one VoIP or two VoIP by mechanical switch. The incoming call from PSTN or VoIP could be picked up by any DECT handsets. This product is to integrate two IP port VOIP Gateway with wireless DECT PABX. 1. Specification of Two Port VoIP Gateway
Item Specification
Protocol ITU-T H.323 v3 compliance, SIP
Supplementary service H.450 (Call Hold, Call Transfer, Call forward)
FAX T.38 G3 FAX
Codec G.711, G.723.1, G.729A, G.729
Network Interface 10BaseT (IEEE 802.3 compatible) x 1
Voice Quality 1. VAD (Voice Activity Detection)2. CNG (Comfort Noise Generation) 3. AEC (Acoustic Echo Cancellation) -- G.1684. Dynamic Jitter Buffer
QoS TOS
Caller ID Detection and generation
Console 1 D-SUB 9 pin RS-232 port
Tone DTMF / CPT (Call Progress Tone) generation/detection
TCP/IP Statically and DHCP for IP address assignment.
ADSL Environment PPPoE (**)
Security ID and password authentication supported in Telnet server and console mode.
Configuration & management Console port, TELNET
Upgrade Firmware upgrade through network by TFTP/FTP
Power Input AC 100V~240V Output DC12V.
Telephony and EMI Regulation EN60950, TBR6, EN301489-6, CTR37, TBR10, TBR22,
Operation Temp. 0° C to 40° C
Humidity 10% to 90% (Non-condensing)
It has successfully made interoperability test with CISCO AS5300 gateway, 3600 series router and 2600 series router, Clarent and Quintum Gateways.
Our gateway solutions support behind NAT router or behind IP sharing device and support both H.323, v3 and SIP.
It has successful passed the interoperability test with Fusion SIP and passed voice interoperability test with mediaring.com.
2. Specification of Wireless DECT PABX
* Support 2 external line (two IP or one IP and one PSTN)
* Expandable up to 15 handsets
* 2-line LCD displays (12 characters x 2)
* 2 external and 2 internal calls are in use simultaneously.
* Call forwarding
* Call waiting signaling
* One handset can handle 2 external calls.
* Dual mode Caller ID for PSTN
* 3-party conference
* Internal calls between handsets
* Dialing of Pause programmable
* Display of call duration
Handset features
* Speakerphone (Handsfree)
* One direct call programming (Hotkey call)
* Incoming line indication
* Online detecting
* Redial last three numbers
* Ringer melody programmable for internal or external calls
* Ringer or call volume programmable for internal or external calls
* key lock
* Reset handset setting
* User authentication
* Telephone book with 20 entries
* User name or logo programmable
* Subscription up to 4 base stations
Base station features
* Dial mode programmable for PSTN
* Flash time programmable for PSTN
* Pause time programmable for PSTN
* Base pin changeable
* Set Base default
* Subscribe and de-subscribe handsets
* Call barring for individual handset programmable
* LCR for PSTN ( Least call routing, operated under service systems)
* Line priority for individual handset
* Ringing group
* Ringing priority for individual handset | 
Networking
