| Now with
Onscreen Programming |
 Get
touch screen control of virtually any powered or relay-activated device
with this elegant, easy-to-use home control system that does it all! The Adicon
Leopard II™ combines the power of the Ocelot with the convenience of a
touch screen. It can be programmed for stand-alone operation, or
controlled by many of the popular third party Home Automation Software
programs. The Leopard II has been designed to accommodate most
automation requirements. External ports are provided for RS-232
communications, RS-485 communications, X-10 communications, and infrared
(IR) control. These ports allow the Leopard™ to interface with a variety
of external devices. | 
Controller: The Leopard II™ controller can handle up to 4096 lines of
programming. The code is stored in a non-volatile memory that will retain it’s
contents even if the power is lost. A battery-backed real-time clock allows the
controller to execute instructions based on the time and date.
Onscreen programming: For simplicity, you can program the Leopard via the
built in on-screen interface. However the most powerful programming option is
via the PC, with the free CMax software included. The program is then download
to the Leopard II with the included interface cable.
Touch Screen: The Leopard II touch screen is a QVGA LCD display with 320
x 240 resolution. The backlight is a Cold Cathode Fluorescent Lamp (CCFL).
IR output: A stereo jack is provided for attaching an optional IR
emitter. Use our
Powermid XL product, to send the IR information through walls and ceilings
to your equipment. Beeper: The Leopard II
provides a piezo beeper that can be set to sound on button presses, or under
user program control.
RS-232 Port: The Leopard II™ provides a RS-232 port for communications
with an external computer. This port is used to initially load the user program.
It can also be used for communications with a third party software program.
Additionally, this port can be used for communications with an ADICON modem, or
for controlling external RS-232 equipment with ASCII commands.
RS-485 Port: The Leopard II™ provides a RS-485 port for communications
with other ADI modules. ADI provides modules for relay outputs, analog inputs,
temperature monitoring, humidity monitoring, zoned IR outputs, audio messages,
switch inputs, etc.
X-10: The Leopard II™ provides a port for connecting the XM10 X-10
interface. This interface allows the Leopard™ to control external lighting and
appliance modules. The Leopard II™ can also monitor/control RCS X-10 thermostats
with this port.
IR Input: The Leopard II™ has an integral learning IR input that can
store up to 1024 unique IR commands. The Leopard™ has the ability to recognize
previously learned IR commands. This is one of the most exciting features of the
Leopard II™, as you can initiate macros based on a single press of a button on a
remote control. The Leopard II lets you build macros to automate
just about anything and offers the ability to send ASCII strings via the BOBRS2
expansion module. The Leopard features a 2-wire screw terminal that lets you
connect various expansion control modules, each with different functionality but
including relay outputs, analogue/digital inputs/outputs, high-current relays
and temperature/humidity/light level sensing. See below for the full list of
avaialble expansion modules. Up to 128 expansion modules can be connected in a
daisy chain (1220m max), giving you a grand total of 2,048 points (each input or
relay output is one point). | Important
Note | | This is
the 220-240V a.c. version of the Leopard, which will NOT work in
the USA. This unit will work on single and 3-phase systems in 220-240V
countries using 50Hz power | | 
Home Automation
