A-10 Dimmer Receiver (micro module)

Characteristics

25-250W
Suitable for 240V conventional and halogen lighting, as well as low-voltage lighting using dimmable coil wound or electronic transformers (leading or trailing edge)
Responds to ‘ALL LIGHTS ON’ and ‘ALL UNITS OFF’ commands
Memory feature allows DAIX10 to switch on to the last dim level used
Can be set to absolutely lowest dim position
Status can be retained after a black out
Soft start and dim provides a relaxed ambience


Operation

The wires of the DAIX10 module are wired to momentary action switches. The DAIX10 can be operated locally (hold down momentary switch for dimming), and can also be controlled via X-10 signals commands originating from other Transmitters, Interfaces or remote control devices. Just as with SAIX, manual control from multiple switches is possible by connecting extra momentary switches in parallel.


Installation instructions

Active and neutral are required to be connected to the DAIX10

The DAIX10 responds to the standard X10 commands like "On", "Off", "All Lights On", "All Units Off". It also receives and responds to dim/bright commands, and will send its dim level to any similarly addressed module. The DAIX10 receives 'extended' X10 commands, meaning it can be sent directly to a certain dim level without needing to first ramp up to 100% like certain other X10 dimmer receivers.

DAIX works great with HPM's Low Voltage switch mechanism.
HPM's low voltage push button switch is a popular way to control the DAIX module because of its light touch activation and smooth dimming action. HPMs part number is NX770ELV24. Please contact your local HPM vendor for more information or contact HPM directly.