ClicOn - Navman ICN 510/520 Active Mounting System *CRADLE ONLY*
NO HOLES INSTALLATION: How to attach a holder to a dashmount 1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder
2. Place the attaching plate in the desired position on the dashmount. Screw the attaching plate into place with the enclosed screws
3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate
4. The holder is in place. PLEASE NOTE: Do not over tighten the attachment screw
A PDA/Mobile Holder designed to hold the device firmly in an up-right position.
With the built-in Tilt Swivel the holder can be adjusted to avoid light reflection on the screen
The device can be easily removed and stored away or taken with you
The cable plug attachment can accommodate the profile of the original plug-in power charge cable
Once the cable is attached to the bottom of the holder, you don’t have to attach the cable manually each time the device is placed into the holder
Manufactured in ABS Plastic
One Year Warranty
Product Number: 215035
** Note that this is a holder system for a Navman ICN navigator. It is NOT a complete GPS navigation system. PDAs, Navigators etc are NOT included with this mount. Pictures showing the navigator are to illustrate the method of mounting only.
Trademarks are owned by the respective manufacturers. Copyright
1995-2008 C1 Group.
For information or assistance with this site, contact C1 Group
Helpdesk EAOE
Links: Technology at
Play
GPS Navigation & Mapping
