Coming early 2008. Contact your C1 Defence Systems Dealer for more information.

---

CE 1000 CORE ARCHITECTURE

PROCESSOR PXA 270 @ 400 Mhz

MEMORY 128/256 MB FLASH

128/256 MB RAM

DISPLAY 640 x 480 pixels (VGA) 256K Colours min 3.5” TFT with Touch Screen

Visible with direct sun light

Night vision compliant

Shock resistant

LED 1 Power On / Charge LED

AUDIO AC ‘97 codec

On board microphone with noise cancellation

On board integrated speaker for high noise environment

I/O 1 USB Device

1 USB Master

1 Audio earphone stereo jack

WPAN Bluetooth Class 2 - integrated antenna

or

Zigbee – integrated antenna

WLAN Integrated IEEE 802.11b/g – integrated antenna

OTHER DEVICES Integrated Accelerometer

Integrated electronic compass

Biometric fingerprint reader

EXPANSION SLOTS 1 user accessible memory card

OTHER EXPANSIONS 1 expansion connector for 1 optional module

KEYBOARD Cursor pad

Virtual qwerty on screen

SYSTEM ARCHITECTURE

PEN DEVICE Stylus

OPERATING SYSTEM WINDOWS CE 6.0

LINUX based on Kernel 2.6

APPLICATION DEVELOPMENT SYSTEM CE: Microsoft Platform Builder & EuroTech SDK for CE

LINUX: Eurotech SDK for Kernel Linux 2.6

CASE Ultra resistant

WEIGHT 650 grams (23 ounces)

BATTERY PACK

POWER 3.6 V Li-Ion Interchangeable (hot swappable) Battery Pack

Standard and Extended Capacity (optional)

ADD-ON MODULES (one module only)

STANDARD Connector 1

· Power in

· USB Master

· USB Slave

· Maximum current available on USB ports: 500 mA

Connector 2

· Analog Audio I/O

WWAN GSM/GPRS/EDGE/UMTS or TETRA

Internal antenna + External antenna connector with automatic/manual antenna switching

capability

GPS Minimum 16 channels receiver with very high sensitivity (receive inside buildings)

DGPS and SBAS (WASS,EGNOS) support

Internal antenna + External antenna connector with automatic/manual antenna switching

capability

WWAN + GPS GSM/GPRS/EDGE/UMTS or TETRA

Internal antenna + External antenna connector with automatic/manual antenna switching

capability

On board microphone with noise cancellation

On board integrated speaker

Minimum 16 channels receiver with very high sensitivity (receive inside buildings)

DGPS and SBAS (WASS,EGNOS) support

Internal antenna + External antenna connector with automatic/manual antenna switching

capability

RFID !3,56 MHz ISO 15693 & 14443 A/B with integrated antenna

Agency Approvals

Emissions EN55022 (CISPR22) Class B

FCC 15. Class B

DOC Class B

CE Mark

MIL-STD 461

Immunity EN55024

FCC 15, Class B

DOC Class B

MIL-STD 461

Safety UL and cUL listed, UL 1950 third edition

TUV T- Mark, EN60950

UL and cUL listed, UL 1604 with all batteries and all wireless radios

ATEX Zone 2, Category 3

Accessories

Battery Charging External universal power supply

Multiple battery charger

External 12/24 V charger

Cigarette lighter power supply

Audio Adapter Converts into 2.5mm stereo jack

USB Device Adapter cable Converts into USB Device connector “A” type

USB Master Adapter cable Converts into USB Master connector “A” type

Environmental specifications

Temperature Operating: -4° to 140° F (-20° to 60° C )

Storage: - 40° to 167° F ( -40° to 75° C)

Cold Boot (battery): 32° F (0°C) @ 70% charge

Cold Boot (AC adapter): any

MIL-STD 810F methods 501.4 and 502.4

Thermal shock 1.5°C < 5°C / minute over -20°C to 60°C

Humidity 0% to 95% non-condensing

MIL-STD 810F method 507.4

Transit shock Up to 4' drop to concrete, all surfaces, edges, and corners

MIL-STD 810F method 507.4

Crash shock 75g, 11ms, Terminal saw tooth

MIL-STD 810F method 516.5

Vibration 0.4g^2/Hz, 20Hz - 1000Hz

6dB/octive 1000Hz - 2000 Hz

MIL-STD 810F method 514.5C-17

Vehicular vibration Composite wheeled vehicle method

MIL-STD 810F method 514.5C-17

Altitude Operational 24.000 ft

Storage 40.000 ft

MIL-STD 810F method 500.4 Procedure 1

Enclosure class Immersion in 150 cm of water

MIL-STD 810F method 512.4 procedure 1

Sand & dust: Particle size < 149 µm, 10 ±7 g/m3 particle density, 1.5 m/s to 8.9 m/s wind

speed

MIL-STD 810F method 510.4 procedure 1

IP 67 equivalence

Salt fog: 5% saline for 48 hours (12 wet, 12 dry, 2 cycles)

MIL-STD 810F method 509.4

Solar radiation: 120 W /m2 (355 Btu/ft2/hr) UVB @ 50°(7X24 hr cycles)

MIL-STD 810F method 505.4

Contamination by fluids: detergents, brake fluid, aromatic hydrocarbons

SPECIFICATIONS AND FEATURES SUBJECT TO CHANGE WITHOUT NOTICE