The water resistant case has a protective hard shell with a soft transparent front for touch screen response
Designed to allow easy placement and removal of the PDA
The case is attached onto a tilt swivel for easy adjustment of the PDA screen and can be quickly and easily removed when leaving the motorcycle
You can attach a charging cable or GPS serial module and also use a headfree headset when the PDA is enclosed in the case.
Inner dimensions of the case are 85x152x2.85 cm.
Fits the following handsets:
Acer n10
Apple iPod
Asus MyPal A620
Dell Axim X3
Dell Axim X5
Garmin iQue 3600
Handspring Egde, Deluxe
Handspring Prism, Deluxe
Handspring Treo 600
HP iPAX 41xx
HP iPAX 43xx
HP iPAX 19xx
HP iPAX 22xx
HP iPAX 55xx, 54xx, 39xx, 38xx, 37xx, 36xx series not expansionpack Plus or with 2 PCMCIA slots
HP Jornada 545
HP Jornada 568
O2 XDA II
Palm m500, m505
Palm Tungsten E
Palm Tungsten T, T2
Palm Tungsten T3
Palm Zire 71
Toshiba e330
Toshiba e350
Toshiba e400
Toshiba e750
Toshiba e800
NO HOLES INSTALLATION: How to attach a holder to a dashmount 1. Loosen the screw in the centre of the holder so you can remove the tilt swivel attaching plate on the back of the holder
2. Place the attaching plate in the desired position on the dashmount. Screw the attaching plate into place with the enclosed screws
3. Place the holder over the attaching plate, aligning the attachment screw in the holder with the attaching plate. Screw the holder onto the attaching plate
4. The holder is in place. PLEASE NOTE: Do not over tighten the attachment screw
Trademarks are owned by the respective manufacturers. Copyright
1995-2008 C1 Group.
For information or assistance with this site, contact C1 Group
Helpdesk EAOE
Links: Technology at
Play
Rugged Cases, Boxes & Bags
