MF700 is an user configurable MifareŽ sector data reader. It can be configured to read MifareŽ card with MAD1/MAD2 standard in a MifareŽ application open system, or can be configured to read the user-defined sector data (Non-MAD) in a user defined closed system. Output interface is able to configure as an RS232 output or Wiegand output or ABA TK2. For Wiegand output is selectable from 26 bits to 128 bits. MF700 also can be set with a Reader ID number for multi-unit communication. In addition MF700 is not only read sector data (or/and card serial number) on MifareŽ card, also can Read/Write the card through the "MF5 Command Mode" from the Host.
Features
:
l Available install on metal surface. l Support MAD1/MAD2 standard and customer MAD-AID setting. l Support Non-MAD format with user-defined sector number. l Anti-Collision l Support Multi Sectors. l Read MifareŽ Standard 4K or MifareŽ Standard 1K card. l Set Reader ID number for multi-link application. l Three output interfaces: Wiegand (Default)/RS232/ABA TK2 l Wiegand output is selectable from 26 bits to 128 bits. l RS232 output packet can be set with Header, Reader ID and Trailer. l Internal LED and buzzer are configurable l Weather resistant.
Specifications
:
Electrical * Power Requirements: DC 6.5 V~12 V / 150mA * Card Type: MifareŽ Standard 1K/4K Card * Card Format: MAD1/MAD2 support * RF Frequency: 13.56MHz Standard * RF Distance: 50mm (With MFA01 Card) * External control Audio / Visual Indication: Internal LED and Buzzer
Mechanical * Dimensions: 83 (L) x 47 (W)x 16(H) mm * Housing material: ABS
Environmental * Operating temperature Range: 0 to 60 Deg C. * Operating relative Humidity: 10 ~ 90%. Note: The Specification is subject to change without notice.
Application
:
1.Access Control 2.Time Attendance 3.Guest Registration System 4.Academic Services 5.Information Services
Available versions
:
MF700 SK : MF700 configurable reader + MF700KIT configurable kit + configurable cable + PCR310U card issue programmer + Card issue and utility software + 9VDC power adaptor + MFA01 Mifare standard 1K card * 3 pcs MF700 : MF700 configurable reader + 100VAC/120VAC/230VAC adaptor for 9VDC output is optional.
Trademarks are owned by the respective manufacturers. Copyright
1995-2008 C1 Group.
For information or assistance with this site, contact C1 Group
Helpdesk EAOE
Links: Technology at
Play
Barcoding, Access Control, Mag Stripe, RFID & POS
