GP series RFID readers are high performance proximity readers featuring long range and small dimensions. The readers run from any voltage from 5 to 12.5 VDC and feature high read range at as low as 5 volts making it ideally suited to a wide variety of applications, particularly access control. The same basic unit can be configured to output most of the common interface formats, including Wiegand, Magstripe, Clock/ Data and RS-232 serial ASCII output, making it easy to upgrade existing installations.
GP-30- up to 20 cm at 5 V with ISO card up to 30cm at 12.5V
Frequency : 125 KHz, ASK Format : 64 bits, Manchester coding Transponder : Read only Dimensions : GP8- 41*24*10 mm GP20- 78*43*15 mm GP30- 104*63*20 mm Temperature Range : -25 to 65 Deg C
Features
:
l Low cost l Long read range l Small outline l Wide voltage range l Potted for environmental protection l Externally programmable interface l Weather resistant
Available versions
:
GP8 - small reader module for OEM applications PCB plug-in fitting GP20 - up to 20 cm read range, wall-mounting GP30 - up to 30 cm read range, wall-mounting standard electric gang box fitting
Longer read range readers are also available GP60A - up to 60 cm GP90A - up to 90 cm
GP20WD GP20 with wood housing is available on request
Trademarks are owned by the respective manufacturers. Copyright
1995-2007 C1 Group.
For information or assistance with this site, contact C1 Group
Helpdesk EAOE
Links: Technology at
Play
Barcoding, Access Control, Mag Stripe, RFID & POS
